(中切削)U型圆型多轴器
2018-08-28    浏览量: 1530

(中切削)U型圆型多轴器

*本体结构利用齿轮箱配合万向节头所组成,容易调整加工孔距不受齿轮所限制,节省调整的时间,也少有死角的限制,适

合加工接近圆周分布孔的工作,是可调式中极容易操作使用的一种规格。为保万向节头之寿命,移动范围不得超过15度,等于

垂直之前后左右30mm以内。

(尽量配合工作之孔距坐标,设计齿轮箱结构即定镗孔位)

*The basic frame consists of gear case and cardan joint. The distance of hole will be easy to control and not to be restricted by gears. 

The set up time is thus saved and it is mostly free of dead angles. It is very suitable for working of round holes and is the easiest to 

operate among the adjustable type. To ensure the lifetime of the cardan joint, the moving range should be confined within 15 degrees, 

which means within a distance of 30mm to the vertical status.

(We will design the structure of gear case, that is, the position of the boring hole as much as possible according to the coordinate of  

per hole.)1535438304872555.png


威廉希尔官网|威廉希尔中文网